In a couple of my earlier tutorials I have described how to remove darts and re-locate them, but not yet how to add them, if you require a tighter fit (this is probably because I don't really wear fitted garments - but it has occurred to me that other people probably do!)

creating waist darts_1

For this tutorial, I have used a bodice pattern, that already has one dart in the front armhole. If the pattern you are adding darts to doesn't have any darts, you may want to distribute the front dart value into a waist dart and an armhole/shoulder dart for a nice fit.

Although I have used a bodice pattern, you could also use this technique for adding waist darts to a skirt or trouser pattern.

creating waist darts_2

As well as removing excess width at the waist with darts, you may also want to remove some of the width by altering the side seam (by following this tutorial) as well. It is normally best to distribute the amount you are removing by combining the two techniques.

creating waist darts_3

Mark in your new dart positions.

The front dart line needs to run from the point of the existing dart, down to the waist.

The back dart should be placed close to the centre of your pattern and can be the same length as your front waist dart (or a little longer).

creating waist darts_4
creating waist darts_5

I drew the line perpendicular to the waistline, but this is not necessary. You would prefer an angled waist dart.

creating waist darts_6

To work out the width of your new darts, you will need to first work out the waistline measurement of your pattern.

To do this, measure your front and back waistlines, and add the lengths together, before multiplying the result by two (as we are working on half a pattern).

Decide on the amount you would like to remove from this result. In this example, I had decided that I wanted quite a close fitting garment. I took my waist measurement and then added 5cm (for ease). I subtracted this measurement from the waist measurement of the pattern, to work out how much distance needed to be removed by the waist darts.

Take the difference between your current waist measurement and your new waist measurement and divide the result by by 4 (as you will have 4 darts - 2 in the front and 2 in the back). If you are also removing some of the excess by altering the side seams, divide the result by 6 (treat each side seam as a dart too). This result is how wide each of your darts will be.

creating waist darts_7

Distribute your dart width evenly, either side of the dart line, on both the front and back patterns.

creating waist darts_8

 

Join the endpoints of these lines to the dart point, to create dart arms.

creating waist darts_9

You now have waist darts!

To finish, shape the seams across the darts, so they fold nicely when sewn and add seam allowance.

You may also like: